No problem Paul. It will read low because the loop in the element is too
small for the lower frequency. The higher power elements have a wider
bandwidth than the lower power elements so your reading may not be way off.
Not sure how much though as I haven't done it at those frequencies.
73
Gary K4FMX
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
> On Behalf Of Paul Decker
> Sent: Wednesday, May 30, 2012 9:06 PM
> To: amps@contesting.com
> Subject: [Amps] Bird 43 slugs
>
>
> What will happen if you use the wrong frequency range slug in a bird 43
> meter? Specifically, I have a legal limit 2m Amplifier and I have a
> 2500D slug (200-500 MHz @ 2.5KW). If I use this slug to measure 144
> MHz, will it damage the slug or meter? Will the readings be anywhere
> close to accurate?
>
> Thanks,
> Paul, kg7hf
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|