Except for the control, voltage adjustment and metering. The later ones
would be pretty difficult to try to run without a chassis and control.
Unless you have a detailed schematic of both the rectifier and the control
circuitry.
The older ones not so much.
73
Jim W7RY
-----Original Message-----
From: Jim Thomson
Sent: Monday, February 04, 2013 3:12 PM
To: amps@contesting.com
Subject: Re: [Amps] 50v power supply options for SS amps
Date: Sun, 03 Feb 2013 20:05:17 -0500
From: "Roger (K8RI)" <k8ri@rogerhalstead.com>
To: amps@contesting.com
Subject: Re: [Amps] 50v power supply options for SS amps
On 2/3/2013 4:57 PM, Dan Levin wrote:
Paul,
My sense is that you are better of buying a used 50v supply from the
telco equipment industry than you are trying to build one. I
especially like the Valere rectifiers, like this one:
http://www.ebay.com/itm/Eltek-Valere-H2000A1-2000W-Hot-Pluggable-AC-DC-Power-Supply-Rectifier-Module-/130844461639?pt=LH_DefaultDomain_0&hash=item1e76f00a47
You sure that is a complete PS? I read it as if it's just the rectifier
module.
73
Roger (K8RI)
### In the Telco world, we never called em power supplies.
They have been called... rectifiers for the last 60 years.
Yes, they are 100% complete power supplies.
later.... Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|