Amps
[Top] [All Lists]

Re: [Amps] Ten Tec Titan 425 Fuses Blew

To: "Rocco Conte" <wu2m@nycap.rr.com>, <amps@contesting.com>
Subject: Re: [Amps] Ten Tec Titan 425 Fuses Blew
From: "Jim W7RY" <w7ry@centurytel.net>
Reply-to: Jim W7RY <w7ry@centurytel.net>
Date: Tue, 19 Feb 2013 18:02:58 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Shorted Titan transformers are fairly common. I happen to have one myself. I'm planning on getting it re-wound.

73
Jim W7RY



-----Original Message----- From: Rocco Conte
Sent: Tuesday, February 19, 2013 11:32 AM
To: amps@contesting.com
Subject: Re: [Amps] Ten Tec Titan 425 Fuses Blew

I had almost the same thing happen.
I got 20 amp fuses from the hardware store. Eventually my problem turned
out to be the transformer.

73 Rocco WU2M

-----Original Message----- From: Mark Robinson
Sent: Saturday, February 16, 2013 10:37 PM
To: amps@contesting.com
Subject: [Amps] Ten Tec Titan 425 Fuses Blew

Both the 20 amp fast blow 240v fuses just blew in my Ten Titan 425 this
evening while I was keying about 1200 watts on 160m. I am told that I can
get Microwave 20 amp fuses from Home Depot.

If these new fuses blow and I need to do some fault finding,  can I power up
the psu via the rf deck with the HV cable disconnected at the psu end as I
would want to be able to take the rf deck out of the circuit.

Any other fault finding tips would be appreciated.


73 Mark N1UK.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>