On 5/3/2013 8:11 PM, Tom Thompson wrote:
As long as the transceiver manufacturers give us transceivers with poor
IMD, it does little good to get the IMD on the amplifier good, unless
you home brew your own transceiver.
It seems to me that many of the newer transceivers have receiver
sections that are getting pretty good. If their less than 20 over and
you hear splatter you can be pretty sure it's them and not your receiver.
My old 756 Pro isn't that good.
73
Roger (K8RI)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|