Amps
[Top] [All Lists]

Re: [Amps] Rectifier equilization?

To: Amps <amps@contesting.com>
Subject: Re: [Amps] Rectifier equilization?
From: Bill Turner <dezrat1242@yahoo.com>
Date: Fri, 13 Sep 2013 12:50:23 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
ORIGINAL MESSAGE:          (may be snipped)

On Fri, 13 Sep 2013 09:28:14 -0700, N7RT wrote:

>I have 100 1N5408's that came off the same reel so I feel they should be 
>matched fairly close.
>I would like to hear a few opinions.

REPLY:

You are correct, they should be close enough without any equalizing
components. 

FYI for next time, 6A10 diodes have become preferred by many for high power
use because of their 6 amp continuous and 400 amp surge ratings and moderate
cost. Their lead diameter is greater so if they are mounted on a PC board
they may not fit, but otherwise they are a drop-in replacement. 

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>