Amps
[Top] [All Lists]

Re: [Amps] Commander HF-1250 problem

To: km1h@jeremy.mv.com, dezrat1242@yahoo.com, amps@contesting.com
Subject: Re: [Amps] Commander HF-1250 problem
From: Louis Parascondola <gudguyham@aol.com>
Date: Tue, 19 Nov 2013 21:17:07 -0500 (EST)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Blah blah blah, but I diagnosed the problem from the get go.



-----Original Message-----
From: Carl <km1h@jeremy.mv.com>
To: Bill Turner <dezrat1242@yahoo.com>; Amps <amps@contesting.com>
Sent: Tue, Nov 19, 2013 9:05 pm
Subject: Re: [Amps] Commander HF-1250 problem


----- Original Message ----- 
From: "Bill Turner" <dezrat1242@yahoo.com>
To: "Amps" <amps@contesting.com>
Sent: Tuesday, November 19, 2013 7:23 PM
Subject: Re: [Amps] Commander HF-1250 problem


> ORIGINAL MESSAGE:          (may be snipped)
>
> On Tue, 19 Nov 2013 14:42:06 -0500, KM1H wrote:
>
>>
>>The HF-1250 has no such problem; I believe your complaint was with the
>>HF-2500 in a RTTY contest.
>>
>>With the HF-2500 I havent had any problem running at a 750W AM carrier on
>>any frequency for long periods.
>>
>>Or at 2000W key down tests
>>
>>Carl
>>KM1H
>
> REPLY:
>
> Correct, the comment was about repairability of Command products. Mine was
> an HF-2500.
>
> And BTW, 750 watts of AM violates FCC rules on PEP unless you keep the
> modulation percentage very low. Did you? And if so, you don't need that 
> much
> carrier.
>
> 73, Bill W6WRT



You trying to play Freddie Flatfoot again Bill? No surprise there.

Where did I say it was used on a ham band or CB for that matter? The wording 
was specifically meant to get a clueless PITA mouthing off.

If you dont know what Im involved with you should keep your flap shut.

Carl
KM1H 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>