Amps
[Top] [All Lists]

Re: [Amps] Follow-up...re: Time to ask for help.

To: dezrat@outlook.com
Subject: Re: [Amps] Follow-up...re: Time to ask for help.
From: "sm0aom@telia.com" <sm0aom@telia.com>
Reply-to: sm0aom@telia.com
Date: Tue, 28 Jul 2015 10:27:10 +0200 (CEST)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Series-resonant screen bypassing works, and was not unusual in the days of the 
4-125A or 4-250A 50 and 144 MHz amplifiers.
It can however be difficult to adjust especially if there are 4 tubes.

73/
Karl-Arne
SM0AOM

----Ursprungligt meddelande----
Från : dezrat@outlook.com
Datum : 2015-07-28 - 10:01 (V)
Till : amps@contesting.com
Ämne : Re: [Amps] Follow-up...re: Time to ask for help.

------------ ORIGINAL MESSAGE ------------(may be snipped)

On Mon, 27 Jul 2015 20:14:33 -0500, you wrote:

>I think the secret to a stable six meter amp is well RF grounded screens.
>
>
>Don W4DNR

REPLY:

Agreed. 

I recall from an ARRL handbook 40 years ago that a .001 uF disk
ceramic cap with leads about 1/2 inch was series resonant at six
meters. Excellent screen bypass, but as others have pointed out the
socked with built in caps is probably best. 

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>