Amps
[Top] [All Lists]

Re: [Amps] SB 220 Exploding Resistor

To: "'Tom Hellem'" <tom.hellem@gmail.com>, <Amps@contesting.com>
Subject: Re: [Amps] SB 220 Exploding Resistor
From: "Dale LeStourgeon" <dlestourgeon@cox.net>
Date: Sun, 17 Jan 2016 19:48:16 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Tom, go to Harbach and buy a pack of their .82ohm resistors 2W ( $6).  Your
resistor did its job as it acts like a fuse in case there is a tube or other
b+ short. Many amps used something like this. I had this issue with my L4B
recently when a  tube failed.  Glad Harbach  has the resistors since
otherwise there are hard to find.
73
Dale K5AJZ


-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Tom Hellem
Sent: Sunday, January 17, 2016 10:06 AM
To: Amps@contesting.com
Subject: [Amps] SB 220 Exploding Resistor

Hi-
My SB 220 has what appears to be a glass coated wirewound resistor in series
with the anode B+ supply lead just before the RF chokes. It is not on the
schematic so must have been a modification done at some point. It blew up in
spectacular fashion one day and I hesitate to just replace it without having
some idea of what may have been the root cause. I do not have much of an
electronics background and would appreciate if someone could suggest some
things that I should check out before I try to put it back on line.

73 To All on The List.

Tom
K0SN
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>