Amps
[Top] [All Lists]

Re: [Amps] Pole pigs removed from oil ??

To: "Mike & Becca Krzystyniak" <k9mk@flash.net>, "'Kevin Stover, AC0H'" <kstover@ac0h.net>, <amps@contesting.com>
Subject: Re: [Amps] Pole pigs removed from oil ??
From: "Jim W7RY" <jimw7ry@gmail.com>
Date: Sat, 4 Nov 2017 10:59:05 -0500
List-post: <mailto:amps@contesting.com>
Here is a much cheaper one.

https://www.jointingtech.co.uk/Clor-n-Oil-50ppm-PCB-Test-Kit


73
Jim W7RY



-----Original Message----- From: Jim W7RY
Sent: Saturday, November 04, 2017 10:55 AM
To: Mike & Becca Krzystyniak ; 'Kevin Stover, AC0H' ; amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??

Test kit....

http://www.andax.com/clor-n-oil-kit---50-ppm-details.aspx

73
Jim W7RY


-----Original Message----- From: Mike & Becca Krzystyniak
Sent: Saturday, November 04, 2017 10:48 AM
To: 'Kevin Stover, AC0H' ; amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??

Agreed, today I would never dump the oil.
Back then, with all the dumping without regard to the impacts we're lucky we
didn't exterminate ourselves...
Maybe that vote is still out...

I'm not sure what oil they might be using today.  It may be relatively
safer, but I wouldn't pour it out either.

73 Mike  K9MK


-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Kevin Stover,
AC0H
Sent: Saturday, November 04, 2017 10:35 AM
To: amps@contesting.com
Subject: Re: [Amps] Pole pigs removed from oil ??

I'm a little concerned about people just dumping the oil.
Transformer oil is a famous source of PCB's. How old does a pole pig have to
be before you can safely say there are no PCB's in the oil?


On 11/2/2017 9:49 PM, Mike & Becca Krzystyniak wrote:
Hi Jim,

    I used one that came off our power lines back in the 70's when they
were
updating the grid.
    The oil was for heat transfer.

    I pulled it from the oil and let it dry out for a few months.
    It never really drys but the weeping eventually stopped.

    Mine ran a pair of 3-1000Z.  2400 VAC on the secondary.
    It loafed along at legal limit.
    I think I paid all of $25 for it.

    Never had an issue with insulation breakdown.

73's  Mike  K9MK

-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Jim Thomson
Sent: Thursday, November 02, 2017 8:44 PM
To: amps@contesting.com
Subject: [Amps] Pole pigs removed from oil ??

Have any of you folks used or know of anybody who has used pole
pigs..removed from oil ?
Is there any inherent risk  with insulation breakdown etc ?

Jim   VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


--
R. Kevin Stover    AC0H
FISTS #11993
SKCC #215
NAQCC #3441
ARRL
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>