Amps
[Top] [All Lists]

Re: [Amps] Amp causing RFI

To: jim@audiosystemsgroup.com
Subject: Re: [Amps] Amp causing RFI
From: Mark Schoonover <mark@ka6wke.net>
Date: Tue, 4 Feb 2020 18:00:21 -0800
List-post: <mailto:amps@contesting.com>
73! Mark KA6WKE

Website: https://www.ka6wke.net

On Tue, Feb 4, 2020, 17:36 Jim Brown <jim@audiosystemsgroup.com> wrote:

> On 2/3/2020 8:03 PM, Mark Schoonover wrote:
> > hat having a decent ground does is eliminate the possibility  of ground
> > loops provided the ground is lifted from the third pin of the AC plug.
>
> This should NEVER be done. It is unsafe, and violates Electrical Codes
> everywhere in North American
>

Point exactly where this is in the NEC.

I
> > did a comprehensive RFI video on the subject and show how ground loops
> > can happen and what to do to eliminate them. Quite possibly the #1 cause
> > of RFI. You can watch the video in the link below.
>
> There is no such thing as a ground loop, and there is no such thing as
> "RF ground." I suggest that you delete that video -- based on this post,
> you don't know what you're talking about, so you're recommending very
> bad practice.
>

Balderdash!


> 73, Jim K9YC
>
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>