Re: [CQ-Contest] Foot switches ?

[Gerry Treas K8GT <k8gt@arrl.net>]

Maybe.

Back in 2001, after I got my TS850, I decided to use VOX.  The pencil 
rolled off the desk, I bent down to pick it up, hit my head on the desk 
edge, out came the expletive, CLICK went the VOX.  Never again.  <grin>
73, Gerry, K8GT


On 8/29/2013 10:21 AM, Cqtestk4xs@aol.com wrote:
> I understand the use of foot switches in MS and MM and not using  VOX.  Am
> I the only guy using VOX in single op?
>   
> Bill K4XS/KH7XS
>   
>   
> In a message dated 8/29/2013 1:53:23 P.M. Coordinated Universal Time,
> W5OV@W5OV.COM writes:
>
> Another  vote for the clipper  switch!
>
> http://www.eham.net/reviews/detail/1810
>
> The Clipper  switch has sufficient resistance.  Not too much - just  right.
>
> Highly recommended.
>
> I've been using them for over 30  years - yes, the same ones.
>
> They're industrial-grade and they don't  spring apart in the middle of a
> contest like those other cheap bent-metal  jobs do.
>
> 73,
>
> Bob W5OV
>
>
> -----Original  Message-----
> From: CQ-Contest [mailto:cq-contest-bounces@contesting.com] On  Behalf Of
> Joe
> Sent: Wednesday, August 28, 2013 1:41 PM
> To:  cq-contest@contesting.com
> Subject: Re: [CQ-Contest] Foot switches  ?
>
> The only problem I have with Any foot switch is that it takes too  little
> force to activate it, so I have to either tighten the lifting  muscle in
> the shins to keep from activating the switch or have the switch  like at
> the side near the ball of the foot and use it in a rolling action  with
> most of the weight of the foot resting on the floor..
>
> Joe  wb9sbd
> Sig
> The Original Rolling Ball Clock
> Idle  Tyme
> Idle-Tyme.com
> http://www.idle-tyme.com
> On 8/28/2013 11:24 AM,  Tom Horton wrote:
> > For years I used an old j-38 key mounted on a piece  of 1/4 plywood. Also
> have used a home made switch with two pieces of  aluminum and a spring,
> $3.00
> footswitch found a most any ham swapmeet, a  sewing machine foot switch and
> one of the best things I ever had was  mounting a footswitch to the side of
> the cubbyhole of my desk and using it  as a "knee" switch. It never slipped
> away.
> > 73 and happy  footswitching...
> >    tom K5IID
> >
> > There is no joy  in Mudville!
> >
> >
> >
> >
> > K5IID Tom Horton   Hillsboro, TX
> > E sorter for ARRL W5 bureau
> > Same call for 57  years!
> >
> >
> >   ________________________________
> >    From: Charlie Gallo  <Charlie@TheGallos.com>
> > To: Katsuhiro Kondou  <kondou@voyackey.net>
> > Cc: cq-contest@contesting.com;  kh6lc@hotmail.com
> > Sent: Wednesday, August 28, 2013 10:34 AM
> >   Subject: Re: [CQ-Contest] Foot switches ?
> >      
> >
> > On 8/28/2013 Katsuhiro Kondou  wrote:
> >
> >
> > > This is what I've been using since last  year's CQWW SSB at V26B.
> > >   http://files.qrz.com/m/jh5ghm/CIMG8305.JPG
> > Nice looking - could  probably sell an article to say "Machinist Workshop"
> here in the USA - they  do short articles on simple  items
> >
> _______________________________________________
> CQ-Contest  mailing  list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
> _______________________________________________
> CQ-Contest  mailing  list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest