RFI
[Top] [All Lists]

Re: [RFI] Pin Arcing

To: "Ward Silver" <hwardsil@centurytel.net>, <rfi@contesting.com>,"Pete Smith" <n4zr@contesting.com>
Subject: Re: [RFI] Pin Arcing
From: "Tom Rauch" <w8ji@contesting.com>
Reply-to: Tom Rauch <w8ji@contesting.com>
Date: Mon, 19 Jul 2004 16:52:37 -0400
List-post: <mailto:rfi@contesting.com>
> Often a little shaking of the pole's guy wires can have
the desired effect,
> and has the added advantage of being able to stand far
enough away so that
> if anything should fall, it is unlikely to hit you.

Careful now about shaking guy wires. A sledge hammer is
actually much safer. A hard hammer tap won't hurt a thing. A
good guyline shake might cause a big problem.

Just the slightest movement will break up the noise, so a
violent shake is not required.



_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>