RFI
[Top] [All Lists]

Re: [RFI] Pin Arcing

To: "Tom Rauch" <w8ji@contesting.com>,"Ward Silver" <hwardsil@centurytel.net>, <rfi@contesting.com>
Subject: Re: [RFI] Pin Arcing
From: Pete Smith <n4zr@contesting.com>
Date: Mon, 19 Jul 2004 17:01:54 -0400
List-post: <mailto:rfi@contesting.com>
At 04:52 PM 7/19/2004, Tom Rauch wrote:

> Often a little shaking of the pole's guy wires can have
the desired effect,
> and has the added advantage of being able to stand far
enough away so that
> if anything should fall, it is unlikely to hit you.

Careful now about shaking guy wires. A sledge hammer is
actually much safer. A hard hammer tap won't hurt a thing. A
good guyline shake might cause a big problem.

Just the slightest movement will break up the noise, so a
violent shake is not required.


Of course. Typically, the poles around here have 3 guy wires on each, since they tend to be used for power, phone and cable TV. The nice part of shaking a guy is that you can feel the frequency of vibration and easily hear the correlation with changes in the noise.


73, Pete N4ZR
The World HF Contest Station Database
was updated on June 5, 2004
2728 contest stations at
www.pvrc.org/WCSD/WCSDsearch.htm


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>