On 9/15/2012 10:07 AM, Eddy Swynar wrote:
with ferrite devices installed at both ends of it.
If you've studied my RFI tutorial, you would know that simply clamping
cores onto a cord isn't likely to do much on the HF bands, even 10M,
because the resonant frequency of a single turn through most cores is
around 150 MHz. For 10M, you must WIND 3-4 TURNS through the core to
lower the resonant frequency to 10M.
Another point that your story, and Pete's stories makes quite well --
persistence pays off!
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|