[RFI] Noise - where do I start?

To:	"rfi@contesting.com" <rfi@contesting.com>
Subject:	[RFI] Noise - where do I start?
From:	Lee STRAHAN <k7tjr@msn.com>
Date:	Sun, 25 Sep 2016 17:55:10 +0000
List-post:	<rfi@contesting.com">mailto:rfi@contesting.com>

Tom and RFI guys,
One other trick that may be available to you with your spectrum analyzer is to 
sync the sweep with the line frequency. Most analyzers have this capability.
Its just marked "Line" in the sweep section on my HP analyzer.
This should keep the peaks your seeing from moving on the screen if the 
interference is at the line rate. This is very helpful with line rate 
interference.
Lee  K7TJR  OR

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [RFI] Noise - where do I start?, (continued) Re: [RFI] Noise - where do I start?, James Gordon Beattie, Jr. Message not available Message not available Message not available Message not available Message not available Message not available Re: [RFI] Noise - where do I start?, Frank N. Haas KB4T Re: [RFI] Noise - where do I start?, thoyer Message not available Message not available Re: [RFI] Noise - where do I start?, Frank N. Haas KB4T Re: [RFI] Noise - where do I start?, JW via RFI Re: [RFI] Noise - where do I start?, Cortland Richmond Re: [RFI] Noise - where do I start?, Dave Cole Re: [RFI] Noise - where do I start?, James Gordon Beattie, Jr. Re: [RFI] Noise - where do I start?, JW via RFI Re: [RFI] Noise - where do I start?, Jim Brown [RFI] Noise - where do I start?, Lee STRAHAN <= [RFI] Noise - where do I start?, Gary Peterson Re: [RFI] Noise - where do I start?, thoyer Re: [RFI] Noise - where do I start?, Dave Cole Re: [RFI] Noise - where do I start?, JW via RFI Re: [RFI] Noise - where do I start?, Frank N. Haas KB4T Re: [RFI] Noise - where do I start?, Hare, Ed W1RFI Re: [RFI] Noise - where do I start?, Jim Brown Re: [RFI] Noise - where do I start?, Dave Cole Re: [RFI] Noise - where do I start?, mstangelo Re: [RFI] Noise - where do I start?, KD7JYK DM09

Previous by Date:	Re: [RFI] Noise - where do I start?, JW via RFI
Next by Date:	Re: [RFI] Noise - where do I start?, Dave Cole
Previous by Thread:	Re: [RFI] Noise - where do I start?, Jim Brown
Next by Thread:	[RFI] Noise - where do I start?, Gary Peterson
Indexes:	[Date] [Thread] [Top] [All Lists]