RFI
[Top] [All Lists]

Re: [RFI] Any RFI issues with Amana AMVC96 Furnace?

To: "rfi@contesting.com" <rfi@contesting.com>
Subject: Re: [RFI] Any RFI issues with Amana AMVC96 Furnace?
From: "John K9UWA" <john@johnjeanantiqueradio.com>
Reply-to: john@johnjeanantiqueradio.com
Date: Sun, 09 Jul 2017 11:38:03 -0400
List-post: <mailto:rfi@contesting.com>
To say that one either Has Noise or doesn't have Noise with a Furnace or 
any other device one needs to do a little qualifying along with that statement. 
If you have enough "Other Noises" then you wouldn't know if the furnace 
was making noise or not making noise. If your just setting there listening to 
your radio on your antennas and you don't specifically hear something 
different when a device starts up or stops or is running it may well be 
creating noises you don't hear. The reason you don't hear it is because all 
the other noises your radio is hearing are louder than this furnace or 
whatever device your talking about. 

You will have a lot more credibility if you stated that you had listened to 
your 
furnace up close with some sort of sense antenna and a receiver capable of 
hearing noise across a wide frequency range. The general noise level in one 
location to another can vary by in some cases by several S Units. 

I like my old Sony Transistor radio model ICF-2001 when looking for noise 
sources. Others have mentioned other receivers and SDR's as well. Do a 
walkabout your own property and house with one of these receivers and 
then go kill your main breaker to the house and see the diffeence in your 
noise level. Keep in mind sometimes killing the Main Breaker still doesn't 
turn off some devices that have batteries or other methods of maintaining 
power to the device for a period of time. 

Please go read and study Jim K9YC's documentation on finding and killing 
noises. Start here. http://audiosystemsgroup.com/KillingReceiveNoise.pdf

My Furnace and AC guy is an old family friend. When it was time for a new 
one in this house I started with I don't want a furnace that maes RFI. His 
next statement was. Then you don't want any furnace with a variable speed 
air handler motor. Two Speed Motor is OK. Hi Speed for AC and low speed 
for Heat cycle. The only thing I hear from it is a Click from the motor starter 
in the AC unit. I can live with that much noise.

John k9uwa
John Goller, K9UWA & Jean Goller, N9PXF 
Antique Radio Restorations
k9uwa@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1-260-637-6426

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>