TenTec
[Top] [All Lists]

[TenTec] PTO Drift Problem

To: <tentec@contesting.com>
Subject: [TenTec] PTO Drift Problem
From: turner@safety.ICS.UCI.EDU (Clark Savage Turner WA3JPG)
Date: Thu, 26 Jun 1997 18:07:55 -0700
> Have you recieved any info on how to solve the PTO drift problem?
> My new Omni "D" drifts about 500 cycles in 40 min, I'd like to know how
> to fix it.

Hi Joe:

Looked into this a little bit, and no one seems to have the answer.
My Corsair PTO drifts about 200 Hz in 40 min, then back 100 Hz and then
stable for a while unless I open the window.  A good breeze will
take me 50 Hz in a half hour it seems.  

I suspect we could just stick a small light bulb inside the PTO
case and leave it on, if we could figure it would bring it all up
a few degrees and keep it there.  That might do it, I think I saw
someone on this list with that idea.

We could also just play with the caps that are compensating in 
there to get them right.  I don't have experience in that, and 
experience is what makes that sort of experimentation work as I
understand it.

Anyone have ideas on stabilizing the older Ten Tec PTO's?  Don't 
need perfection, if we could just keep it down to a small amount
it would help a lot.

Clark
WA3JPG

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>