TenTec
[Top] [All Lists]

[TenTec] OMNI-VI Plus features lost from OMNI-V?

To: <tentec@contesting.com>
Subject: [TenTec] OMNI-VI Plus features lost from OMNI-V?
From: geraldj@ames.net (Dr. Gerald N. Johnson, P.E.)
Date: Tue, 28 Sep 1999 09:48:31 -0500
Somehow with my Corsair II, I find I prefer rag chewing with the BPT set
for about 1.8 Khz pass band, rolling off the higher frequencies. I do
that to cut out noise and QRM. I don't know about rag chewing on a
private frequency and empty band using the linear to get across town.
There maybe the wider filter would be OK.

I suspect the TT filters ring less than the IRC filters when hit by
noise and fast CW, but I've not checked them out with a scope. I'm sure
the TT filters ring less than Kenwood and Collins filters on lightning
static. The 400 Hz IRC filter in my TS-130 starts to ring noticeably on
CW at about 40 wpm.

There is no transverter connection with the VI(+). I don't yet know of a
mod. I also don't like the mode switches the VI (and V) make going to
LSB for CW on 28 MHz. so wouldn't use it with a transverter for VHF
anyway where CW and USB contacts are mixed. The frequency shifts of rice
boxes are bad enough without inverting the pass band that the Omni V and
VI do. So I'll work out a transverter mod to my Corsair II.

73, Jerry, K0CQ

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>