TenTec
[Top] [All Lists]

[TenTec] Ten Tec's new DSP firmware/software web link

To: <tentec@contesting.com>
Subject: [TenTec] Ten Tec's new DSP firmware/software web link
From: mark@microenh.com (Mark Erbaugh)
Date: Mon, 31 Dec 2001 20:24:44 -0500
Scott (et al),

Thanks for the explanation. I was trying to figure out the significance of
RF^2. Being a ham, I thought you were trying to square RF. Imagine, a 100
watt rig that puts out 10 kW (but of course, is still legal on the ham
bands) <g>.

73,
Mark

----- Original Message -----
From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
To: <tentec@contesting.com>
Sent: Friday, December 28, 2001 10:10 AM
Subject: Re: [TenTec] Ten Tec's new DSP firmware/software web link


> Also available directly at www.rfsquared.com
>
> Scott Robbins, W4PA
> Amateur Radio Product Manager
>
>
> At 07:07 PM 12/27/01 -0800, you wrote:
> >There is a new download URL for the Ten Tec DSP based
> >radios. This new single location "Remote Fimware
> >Factory" has the latest firmware/software versions for
> >all of the flash ROM based DSP radios plus the RX-320.
> >Also it puts all of the other downloadable goodies
> >into one location. It's a great idea, check it out at:
> >
> >http://www.tentec.com/rfsquared/
> >
> >N9DG
> >
>
>
> -----------------------------------------------------------------
> Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
>   Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
>   Repair (865) 428-0364 8-4.  Sales (800) 833-7373 9 am-5:30 pm.
>   Fax (865) 428-4483 24 hrs.  Visit us at <http://www.tentec.com>
>
>   --->--->---> Please note: E-mail <sales@tentec.com> for sales
>   and general product info only.  We presently do not offer
>   repair, parts, or kit building tech support by electronic mail,
>   please telephone (865) 428-0364 or (865) 453-7172.
>
>   Ten-Tec manufactures amateur radio equipment, military and com-
>   mercial use HF radio equipment, custom aluminum and steel
>   enclosures and has an on-premises, fully equipped tool and die
>   facility supplying metal and plastic injection mold industries.
>   Potential tool and die, custom enclosure or communications
>   electronics customer?  Contact us with your needs.
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


<Prev in Thread] Current Thread [Next in Thread>