Hi Ken,
Do you happen leave your RS-35M on all the time? I don't have a "V" (wish I
did!), however, perhaps a couple have a problem maintaining the memories
when DC is removed.
73,
John W0DC
----- Original Message -----
From: "Ken & Linda Burrough" <w8keb@1st.net>
To: "Ten-Tec @ Contesting. Com" <tentec@contesting.com>; "Tim Randa"
<tranda@cox.net>
Sent: Friday, November 29, 2002 7:36 PM
Subject: Re: [TenTec] Re: [Ten-Tec516] Losing Memories
> Hi All
>
> I have had my Argonaut V for six weeks now and not one problem or glitch.
I
> use the Astron RS-35M power supply through the MFJ 1118 power strip. I
have
> never lost the memories except in the first two days. I could not get the
> brain to move the hand to the func button and then the V-M button.
>
> The little Argo 5 is one of if not the best QRP rig I have owned.
>
> Ken/w8keb
>
> > ----- Original Message -----
> > From: "jim danehy" <jdanehy@cinci.rr.com>
> > To: <Ten-Tec516@yahoogroups.com>
> > Sent: Friday, November 29, 2002 6:20 PM
> > Subject: Re: [Ten-Tec516] Losing Memories
> >
> >
> > ME TOO. I just thought I did not do things properly
> >
> > W9VNE
> > Jim Danehy
> > Cincinnati, Ohio, USA
> > -84° 21' 29" W
> > 39° 03' 33" N
> > ----- Original Message -----
> > From: w4jz
> > To: Ten-Tec516@yahoogroups.com
> > Sent: Friday, November 29, 2002 4:03 PM
> > Subject: [Ten-Tec516] Losing Memories
> >
> >
> > This now has happened twice. Once Tuesday & today. When first
> > turning rig on I lose ALL memories. As if I never entered any.
> >
> > Power supply, Astron RS-35A, turn on first then rig. It was turned on
> > this way Tuesday. I have a MFJ High Current DC outlet which has an
> > on/off switch. I, today, turn power supply on, then switch, then
> > rig. Lost memories again.
> >
> > I did a master reset & will see what happens. Glad I don't have no
> > more than 9 memories.
> >
> > Wonder if anybody else has seen this?
> >
> > Reed W4JZ
> >
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > Ten-Tec516-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > To unsubscribe from this group, send an email to:
> > Ten-Tec516-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|