[TenTec] Fw: Orion and INRAD filters

[Bill Tippett <btippett@alum.mit.edu>]

> Yes, The 753 will work in the Orion.  I ordered the newer
> filters centered on 9000.75 to be the same as the Ten Tec
> filters before they said that the center frequency is
> adjustable in the Orion.  So the 9000.6 filters will work fine.
> George, W2VJN

        Just to add a note to this, Orion's adjustment range for the
500 Hz position is -400 to +400 Hz, so the additional 150 Hz offset
required by the 9000.6 filter should be easily covered as W2VJN stated.

                                        73,  Bill  W4ZV