TenTec
[Top] [All Lists]

Re: [TenTec] FS: Omni Six - Option 3 DSP

To: <tentec@contesting.com>
Subject: Re: [TenTec] FS: Omni Six - Option 3 DSP
From: <k4dlj@bellsouth.net>
Reply-to: tentec@contesting.com
Date: Wed, 10 Dec 2003 9:23:35 -0500
List-post: <mailto:tentec@contesting.com>
Hi Paul, 
Hope you do well with the Omni 6 plus opt 3. 
Your mods are interesting. 
Is there anywhere here on the net to get the mods. 
Intersted in the CW monitor, clickless, isolation mods. 
Your help would be much appreciated.
Best 73 and good Luck - de Dave K4DLJ
> 
> From: "Paul Christensen, Esq." <w9ac@arrl.net>
> Date: 2003/12/10 Wed AM 09:01:16 EST
> To: <tentec@contesting.com>
> Subject: [TenTec] FS: Omni Six - Option 3 DSP
> 
> For Sale:
> 
> Omni Six modified to "Plus" with factory option 3 upgrade.  Beautiful
> condition - a solid "10" with no visible marks, wear or blemishes.   Facts
> about this Omni Six:
> 
> - Full output on all bands.
> - Works as expected with no glitches, unusual mannerisms, or needs for
> resets.
> - Rx input mod incorporates 1KW H.F. MicroSemi PIN diodes in the T/R
> circuit.  This improves the main-to-aux antenna isolation to better than 80
> dB (yes, really).
> - Transmit CW waveshape mod to the ALC circuit to improve rise/fall symmetry
> - Transmit BFO circuit crystals changed to temperature stable units from JAN
> which results in a clean and chirpless transmit CW signal.
> - CW monitor circuit mods for totally clickless and thump-free keying.
> - Receiver passband board modified per Ulrich Rhode with Hewlett-Packard
> glass PIN diodes.  Diode bias optimized.
> - With Manual and power cable but may need to secure a shipping carton from
> Ten-Tec.
> - Includes a full compliment of filters:
> 
> 6.3 MHz I.F.:
> 
> 2.4 kHz
> 1.8 kHz
> 500 Hz
> 250 Hz
> 
> 9 MHz IF.:
> 
> 2.4 kHz
> 500 Hz.
> 
> All mods professionally done.
> 
> Terms: $ 1750.00 + shipping F.O.B - Jacksonville.  Priority to those who
> wish to purchase the full set of filters.  Will reduce price accordingly if
> only select or no filters wanted.  As a point of price reference, Ten-Tec
> currently wants $1750.00 for a used Omni Six/ Option 3 with NO filters.
> 
> -Paul, W9AC
> 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>