[TenTec] Ten-Tec 706 Microphone

["Reed" <w4jz@ispwest.com>]

Thanks Mike for the reply.  No, this one does not have the amplification switch 
on bottom.

I believe I have found the problem.  When I upgraded the rig to ver 1.08, year 
or so ago, I did not increase the mic gain pot on the logic board enough.  It 
seems to be a lot better now.  Have good ALC at 10 o'clock.  With the 
additional foam over the element my mouth was not as close to the  desk mic as 
was with the hand mic.

Reed  W4JZ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec