TenTec
[Top] [All Lists]

[TenTec] Voltages on 262G power supply

To: <tentec@contesting.com>
Subject: [TenTec] Voltages on 262G power supply
From: "Danny Shaver" <n5nbk@nortexinfo.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 25 Feb 2006 17:14:59 -0600
List-post: <mailto:tentec@contesting.com>
Hello Ten-tec techies, I need some help!!
I have a 262G power supply that I just got with a Triton IV.
I am getting distorted SSB transmit reports when I turn the ALC up all the way 
on all bands. It is fine when I put the  ALC at about 50%. 
The voltage out of the supply is 12.95 volts on receive. In transmit with 50% 
ALC it drops to 12.5 to 12.67 volts, and at 100% ALC it goes to 12.24 to 12.35, 
depending on band. I am testing into a 50 ohm dummy load. What do you think?? 
Thank you for your help in advance.

Dan N5NBK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>