TenTec
[Top] [All Lists]

Re: [TenTec] RF in Audio Mods for Jupiter

To: tentec@contesting.com
Subject: Re: [TenTec] RF in Audio Mods for Jupiter
From: "Mark DeBord" <markinkpt@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 27 May 2006 16:43:34 -0400
List-post: <mailto:tentec@contesting.com>
I run 800 watts into a Carolina Windom. I have had some RF issues when using a Jupiter, Orion I, and even my old radios (Icom 746PRO and 756PRII).
I find there seems to never be a silver bullet that solves all RF issues.

I have break in the coax just outside the shack so I can disconnect the antenna during the summer for storms, etc. Having some RF issues on 75 with the Orion (and Scout), I placed a Radio Works T-4G line isolator inplace of my barrel connector outside and no further RF issues! I bought the one with the ground strap, but do not connect it to the ground; without it took care of the prob,. Of course I have a ground from rods outside going to the rig, amp, tuner, etc.

Just wanted to make you aware that this seemed to work for me. You could save a little money and get the one without the strap, but at least you would have the strap, if you needed it, for the most stubborn RF. If you end up needing to use the strap, use a seperate ground rod from your regular ground rod.

73's

Mark KA4ICK



<Prev in Thread] Current Thread [Next in Thread>