TenTec
[Top] [All Lists]

Re: [TenTec] Older Ten Tecs and Roofing filters

To: tentec@contesting.com
Subject: Re: [TenTec] Older Ten Tecs and Roofing filters
From: Douglas <sparks06524@yahoo.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 23 Feb 2007 22:04:50 -0800 (PST)
List-post: <mailto:tentec@contesting.com>
>The key difference between Ten Tec's approach and the
>Icom/Yaesu approach is that the roofing filter is at
>9 MHz
>vs. 69 or 45 MHz. It is easier to make a narrower
>low ripple
>filter at 9MHz vs. VHF.

>In the Sherwood chart the Corsair (not II) came in
>at 79 dB @
>3 kHz spacing. This is close to the Omni VI+ in
>Sherwood's
>chart. I'd be surprised if the Corsair II is not as
>good as
>or slightly better than the Corsair.

>http://www.sherweng.com/table.html
 
>Duane

Sherwood seems to rank those receivers in order of
performance based on close frequency dynamic range.

I'm amused to see that the 1978 vintage Atlas 350XL
rates among the top guys. I have a 350XL and was
always impressed by its performance. It has a few bugs
in other areas but the receiver and its QSK is as good
as Ten-Tec's. I enjoy it as much as using my Omni-C
and my Corsair II.

Doug/WA1TUT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>