Rick Williams wrote:
> Bob this may be the LPF repair as described on my website. I say MAY
> because this repair typically manifests itself as low power on SOME bands.
>
> The disassembly instructions take you right down to the finals and if you
> need to replace them it's simple to get to them with these instruction.
> Enter the site and the Argo fix is in the "Ten-Tec Information" section.
>
> Again good luck.
>
> 73,
>
> Rick
> VE7TK
>
> Many thanks, Rick.
Mine has low power on all bands, by the looks of it, so it may be the
finals instead of the diodes in the LPF circuits - unless they're all blown!
By the way, I spotted on your website the note about the 1208 board.
Very interesting... I've just picked up a part-finished 1208 on EBay, so
I'll watch out for the problem.
73
Bob
MM0RKT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|