Jeff
Your DB9 appears to be incorrect.
Contact TenTec service.
Ron
K3MIY
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Jeff Davis, KE9V
Sent: Sunday, August 26, 2007 11:10 AM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Argo V Serial Port
I finally got around trying to connect my new Argo V to the computer.
The DB-9 on the back appears to be incorrect -- or non-standard
anyway. I'm familiar with a shell that has five pins on the wide part
of the connector and four pins on the narrow part.
The connector on my Argo V is reversed. There are four holes on the
wide part of the connector and five holes on the narrow part. I have
to believe this is a factory assembly error as no "off the shelf"
cable is going to work with this connector.
A picture's worth a thousand words (high-res):
http://ke9v.net/img/argo-port.jpg
Anyone else seen this? Am I barking up the wrong tree?
Thanks for any info.
73 de Jeff, KE9V
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|
