TenTec
[Top] [All Lists]

Re: [TenTec] Corsair II & Titan 425

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Corsair II & Titan 425
From: Alan Sewell <alan.n5na@gmail.com>
Reply-to: alan.n5na@gmail.com,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 01 Jan 2008 11:40:32 -0600
List-post: <mailto:tentec@contesting.com>
Gary has sent me the Corsair QSK mod and I have posted it on the 
TenTecWiki.  It is available at 
http://www.tentecwiki.org/doku.php?id=561 under "Mods & Fixes".

Thanks Gary!

Alan  N5NA

http://www.tentecwiki.org



GARY HUBER wrote:
> My Corsair II also has the TX EN & TX OUT jacks (with jumper). Built in the 
> "last run" of Corsair IIs... but I made the "QSK mod" and used it with my 
> Titan 425. I have an Adobe PDF copy of the Corsair QSK mod. Email me if you 
> want a copy.
>
>
> Best regards,
> Gary - AB9M
> CSM(r) G.L.Huber
> 9679 Heron Bay Road
> Bloomington, Illinois 61704
> (309)662-0604
> www.csm-gh.com
> csm-gh@www.csm-gh.com
> gary.huber@us.army.mil
> ab9m@arrl.net
> www.csm-gh.com/mytrike.htm
> www.csm-gh.com/75thRepoDepo.htm
>
>
> ----- Original Message ----- 
> From: "Bill Cotter" <n4lg@qx.net>
> To: "Carl Moreschi" <n4py@arrl.net>; "Discussion of Ten-Tec Equipment" 
> <tentec@contesting.com>
> Sent: Monday, December 31, 2007 4:24 PM
> Subject: Re: [TenTec] Corsair II & Titan 425
>
>
>   
>> Carl, et al,
>>
>> I had a late model Corsair-II that had the tx-en and the tx-out
>> jacks for connection to the Hercules and Titan series. It was
>> factory installed and I have only heard of one other owner with the
>> same. You had to use the dual-pin jumper with it when not using the
>> amp.
>>
>> If you wish to see how TT came up with the signals, you might try
>> to find an owner with a late manual revision that includes tx-en
>> and tx-out.
>>
>> 73 bill n4lg
>>
>>
>>     
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>