As I remember ... it will actually say PLL UNLOCK
scrolling on the display...have not heard of what you
are seeing...sorry...Tom
--- john ferro <foxbat426@hotmail.com> wrote:
>
> hi everyone, i just picked up a paragon I - the guy
> i purchased it from said it had a PLL unlock error,
> but that the radio worked - so far i get no error
> and the radio receives wonderfully. i just wired up
> my shure 444d mic to be used with this radio and
> when i key the mic a funny symbol next to the freq.
> display comes on - it looks like an E turned on its
> back with three lines (rays?) coming out of the
> bottom of the E - is this the PLL error message?
> also after keying the mic there is a slight delay
> before returning to receive mode? when the radio
> returns to receive mode the symbol goes away - i was
> thinking i have the mic wired wrong - but it seems
> to be keying the radio - has anyone ever seen this -
> there is no reference to this in the paragon manual.
> thanks again for all your time - i have learned a
> great deal about ten tecs here and i appreciate all
> the expert commentary.
>
> sincerely, john
>
>
_________________________________________________________________
> Need to know the score, the latest news, or you need
> your Hotmail®-get your "fix".
> http://www.msnmobilefix.com/Default.aspx
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|