> Found this nice table. Thought I would pass it along.
> http://www.firestik.com/Tech_Docs/SWRLOSS.htm
>
>
>
"SWR (Standing Wave Ratio) affects the power output of your radio. The
following table shows the effect of SWR for a transmitter with 4 watts
of transmitted power."
Using a standard power level of 4 watts, they are not talking to the
amateur QRP crowd, because those guys generally consider 5 watts to be
the regular QRP level. Who do you suppose this chart was made for?
Apparently for people who want some simple (not necessarily accurate)
explanation of why they should care about SWR, without the complications
of transmission line loss included. A quick truncation of the url to
find the home page reveals who their audience is.
Checking a couple of values on this table, it appears the assumption is
that all of the reflected power just gets dissipated at the transmitter
and does not get reflected back towards the antenna. Just a single
reflection at the mismatch, and the reflected power is lost, that's it!
If there was a real good circulator (isolator) at the transmitter, that
would be nearly true.
DE N6KB
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|