TenTec
[Top] [All Lists]

Re: [TenTec] Doorknobs needed - Was: Ig drift on amps

To: Tentec@contesting.com
Subject: Re: [TenTec] Doorknobs needed - Was: Ig drift on amps
From: "Gary Smith" <Gary@doctorgary.net>
Reply-to: Gary@doctorgary.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 09 Feb 2009 23:17:31 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Fair radio does have the 1000pf 858 caps though they say there are 
dings on them; I'd like to get as new if possible. If I can't get as 
new, I'll go for those.

As to Surplus Sales; Grinnel made me a promise in 1995 at the 
Grayslake Hamfest in IL as part of a deal I gave him on triangular 
support edge wound roller inductors and he never kept his end of it. 
First big burn for me in Ham Radio. I won't ever deal with him again 
regardless of availability or need.

Thanks though for the suggestions!

73,

Gary - KA1J

> Surplus Sales of Nebraska has some of them.
> Fair Radio Sales has some of them.
> 
> Check E-Bay for some of them.
> 
> 73
> Bob, K4TAX
> 
> ----- Original Message ----- 
> From: "Gary Smith" <Gary@doctorgary.net>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Monday, February 09, 2009 7:29 PM
> Subject: [TenTec] Doorknobs needed - Was: Ig drift on amps
> 
> 
> > It appears I likely need to replace at least some of the padding 
> > capacitors in the tank on my 425 to stop the Ig drift on the lower 
> > bands. To do a clean sweep, what I need to replace are the following.
> > 
> > A. (C6, C7) Two 1000pf @ 5KV series 858s doorknobs
> > 
> > B. (C17)     One 500pf @ 5KV series 858s doorknob
> > 
> > C. (C18, C20) Two 300pf @ 5KV series 858s doorknobs
> > 
> > D. (C15)     One 400pf @ 15K Series HEC HT57 doorknob
> > 
> > E. ( C16) One 270pf @ 2KV disc: Ceramic?/Mica? which is about 
> > 1"x3/32" and is glossy yellow. On the side it reads:
> > 
> > RMC   270    J
> > 2KV    P     3
> > 
> > 
> > I would like to change "E" to an 858 series doorknob, making it a 
> > 270pf @ 5KV series 858 doorknob.
> > 
> > The Drifting Ig issue is really a problem on the low bands and I'm 
> > concerned about damaging the tubes. If you have any of these caps in 
> > as new condition available, please contact me off list.
> > 
> > Thanks!
> > 
> > Gary
> > KA1J
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> 
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>