TenTec
[Top] [All Lists]

Re: [TenTec] Omni VI+ Repair needed

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Omni VI+ Repair needed
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 23 Apr 2009 16:29:46 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
If you want it repaired, send me an e-mail off reflector.

RMcGraw@Blomand.net


73
Bob, K4TAX


----- Original Message ----- 
From: "Phil Chambley Sr." <k4dpk@comcast.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Monday, April 20, 2009 10:33 PM
Subject: Re: [TenTec] Omni VI+ Repair needed


> Doug....
>
> If you decide to sell this radio, I would be interested in it for parts.
>
> Phil
> K4dpk
>
> ----- Original Message ----- 
> From: "Speer, Doug" <Doug.Speer@FairbanksMorse.com>
> To: <tentec@contesting.com>
> Sent: Monday, April 20, 2009 12:32 PM
> Subject: [TenTec] Omni VI+ Repair needed
>
>
>>I have an Omni VI Plus that is a suspected static discharge victim.  In
>> its current state the receiver is fully functional and works just fine.
>> The transmitter puts our little or no power with associated reduced
>> current draw on the power supply and odd Po readings on the panel power
>> meter.  The little or no power output has been confirmed with an
>> independent power meter.   Ten-Tec originally repaired this unit with
>> identical symptoms by replacing the drivers, finals and PIN diodes on
>> the BPF/Front End Board.  The unit failed again shortly after the
>> original Ten-Tec repairs.   Ten-Tec now suspects further problems with
>> PIN diodes and / or an OP Amp in the SWR circuit that apparently
>> provides feedback to the RF circuits.  Ten-Tec declared this unit as
>> "not economically repairable" and subsequently I filed a homeowners
>> claim on the unit therefore Ten-Tec will not perform any further service
>> work on the rig.
>>
>> I have neither the time nor test equipment to dig into component level
>> repair myself.  I'm looking for someone knowledgeable and experienced
>> with Ten-Tec Omni VI+ servicing who would be willing to take a look at
>> the rig.  Please contact me off line of the reflector and let me know
>> your experience and bench rates.  I can then discuss in more detail what
>> I know / don't know about the rig and its issues.
>>
>> Doug, W9PN
>> Doug.Speer@fairbanksmorse.com
>>
>>
>> ----------Legal Disclaimer----------
>>
>> The information contained in this message may be privileged and
>> confidential, and is intended solely for the use of the named addressee.
>> No other person is authorized to access, copy or re-use this message (or
>> any information contained herein).  If you are not the intended 
>> recipient,
>> please notify us immediately by replying to this message and delete it
>> from your computer.
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>