Re: [TenTec] modifying ten tec scout modules for different frequencys

[Stuart Rohre <rohre@arlut.utexas.edu>]

Mike,
Depending on the fixed range of the PTO, no reason you could not put a 
proper crystal in the module to mix with the standard PTO to produce the 
60m band.  The modules contain the xtal controlled local oscillator for 
500 khz band segment, and a LPF for the final signal for the band chosen.
As you may know, the 10m module has a switch to select the first 500 kHz 
of the band or the second 500 kHz, but it does not go all the way up to 
30 MHz, leaving out 29 to 30.
You would need some band specific components for both circuits, the 
final 60m LPF and the mixer/ oscillator.
-Stuart Rohre
K5KVH