Doug..............FWIW......I use a EWE, very close to the transmit antenna,
and connected to the rx only input on the O II. No problems so far using
the Alpha.
73 John W4II
----- Original Message -----
From: "Speer, Doug" <Doug.Speer@FairbanksMorse.com>
To: <tentec@contesting.com>
Sent: Monday, January 11, 2010 1:06 PM
Subject: [TenTec] Orion II receive antenna input
>I am away from my QTH & Orion II manual. Maybe some of you know the
>answers to my questions. I would like to use the receive antenna input for
>a 160/80m low noise receive antenna input. How much built in RF protection
>/ switching does the Orion II have on this input? In other words how much
>input protection do I need on the receive only antenna to prevent RF damage
>to the Orion due to RF energy from my transmitting antenna feeding back
>into the receiver via the receive antenna input? How is the use of a
>separate receive antenna best handled with a single Orion II station?
>
>
> Doug, W9PN
> Janesville, WI
>
>
>
> ----------Legal Disclaimer----------
>
> The information contained in this message may be privileged and
> confidential, and is intended solely for the use of the named addressee.
> No other person is authorized to access, copy or re-use this message (or
> any information contained herein). If you are not the intended recipient,
> please notify us immediately by replying to this message and delete it
> from your computer.
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 270.14.134/2614 - Release Date: 01/11/10
13:29:00
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|