With this one I can set the side-tone level all the way
up to 65 before the pops begin, and by the time one
gets past 80 on towards 99 the distortion on the
side-tone is still really bad -- BUT -- for me at
least, levels are 50-60 are all I need and that is
now distortion free, at least with a 610 Hz sidetone
which is the only one I tested or use. I also am
using the speaker and not headphones for this.
Since one gets the side-tone every time the SPOT
button is used, the side-tone distortion was really
objectionable with 2.043B.
The NR seems better too, but most all the time I don't
really need it -- and it's nice not to have artifacts that
sound like NR action on the side-tone which the side-tone
is set to 50-60.
There are a few CAT wierdnesses here and there, but the reliability
of sending a strings of "*" commands seems better.
Unless something else crops up, I think I can live with this
release...
73 --
Harry, W5PNY
--
Harry G. McGavran, Jr.
E-mail: w5pny@arrl.net
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|