I'm always looking for a winter project.
Provided there are no hard to get parts such as inductors or transformers, I
haven't seen a schematic, I could pop a circuit board for one.
Provided, I don't step on too many toes considering it is copyrighted material
from ten tec.
Again, not looking at the schematic, does the noise blanker for the Triton
four also work for the Omni series?
Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/
J e e p
o|||||||o
"If you can't explain it simply then you don't understand it well enough"
Albert Einstein
On Jul 25, 2010, at 6:39 PM, Louis Ciotti wrote:
> With out looking at the schematic, I believe the noise blanker circuit
> could easily be replicated if you do not locate one.
>
> On Sun, Jul 25, 2010 at 2:59 AM, Joe Roberts <jroberts@io.com> wrote:
>> Thought I'd ask on the off-chance somebody has a noise blanker board
>> available for the 544...
>>
>> Love the old 544 but drowning in summertime electrical noise here...much
>> of it blankable on many radios. Wish the Omni V blanker worked. Usually
>> end up running an FT-102 lately because of the effective NB.
>>
>> Maybe I'll get lucky and find one!!
>>
>>
>> 73,
>>
>> Joe N5KAT
>>
>>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|