TenTec
[Top] [All Lists]

Re: [TenTec] 4229 Tuner Balun Replacement?

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] 4229 Tuner Balun Replacement?
From: Ken Brown <ken.d.brown@hawaiiantel.net>
Reply-to: ken.d.brown@hawaiiantel.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 13 Nov 2010 17:59:06 -1000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
> Question: How does the internal balun in a link coupled tuner
> compare with the a 'tri-filer' balun such as used in the 
> Nye-Viking MB-V-A?
>   
A link coupled tuner IS a balun. It is not a tuner WITH a balun. It is 
essentially a tunable air core transformer. Usually (perhaps always) a 
link coil of just a few turns is the primary of the transformer, fed by 
the UNbalanced transmission line (coax) from the source (transmitter). 
The secondary generally has a many turns, perhaps tapped for band 
switching (as in the case of a Johnsom Matchbox) and is connected to the 
BALanced transmission line to the load (antenna). The transformer 
windings have variable capacitors connected to them to make it tunable. 
In the Johnson Matchbox only the secondary has tuning capacitors. Other 
variations may also have a tunable primary. In the Johnson Matchbox the 
secondary is actually two coils, with the primary link in the middle of 
them.  Or perhaps you could say it is one big center tapped coil, with 
bandswitching taps at both ends.

My labeling of primary and secondary assumes that you are transmitting. 
Turn the labels around for receiving.

DE N6KB

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>