I recently purchased a 3 year young unit with the blue screen for it's
re-sale ability along with the keyboard. It also is MARS capable.
I'm sure some one will want it someday.
From: email@example.com [mailto:firstname.lastname@example.org]
On Behalf Of Mark Milburn
Sent: Wednesday, August 31, 2011 8:54 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Jupiter CW personality problem
I've had mine since 2002 and still love it to death. I had the
larger chip put in because I was curious and also thought it
would keep its value longer, but after a few tries with the CW
personality, I never use it. I use the Pegasus rig control
program with it while working the digital modes, and it
works just great for my needs.
Glad you got it working. Lots to discover with a new rig.
Mark Milburn KQ0I
Des Moines, IA
on Skype as: markkq0i
>From: Tim Cook <email@example.com>
>To: Mark Milburn <firstname.lastname@example.org>; Discussion of Ten-Tec Equipment
>Sent: Wednesday, August 31, 2011 5:13 AM
>Subject: Re: [TenTec] Jupiter CW personality problem
>Thanks Mark , you hit it on the head, I just put the latest "normal".
>Jupiter firmware on it and it is fine now. I am a cw op but have no
>need for a cw reader.
>It's an amazing little radio for what it is.
>Sent from my iPhone
>On Aug 30, 2011, at 9:14 PM, Mark Milburn <email@example.com> wrote:
>> Don't think I went far enough in explaining...if you won't be
>> using the CW mode, you don't HAVE to install the larger
>> chip. Just download the 538 mode from the Ten Tec site and
>> load it into the Jupiter. It will replace the CW mode and you
>> will be able to use the Jupiter just as it was originally issued,
>> it just won't have the reader and probably some other stuff
>> that was added when they wrote the CW personality.
>> Mark Milburn KQ0I
>> Des Moines, IA
>> on Skype as: markkq0i
>>> From: NZ8J <firstname.lastname@example.org>
>>> To: email@example.com
>>> Sent: Tuesday, August 30, 2011 6:05 PM
>>> Subject: [TenTec] Jupiter CW personality problem
>>> I just bought a used Jupiter, (older model with green screen and gray
>>> case). It looks and works fine with one problem. The guy who I
>>> bought it
>>> from briefly mentioned it had the CW personality Firmware. It's there
>>> but doesn't work like the instructions on the Ten Tec web page says.
>>> My question is, were there different levels of upgrade from the
>>> Jupiter to the newer CW personality? I don't know much about it
>>> and the
>>> person I bought it from has not been of any help. The cw reader
>>> seems to
>>> work, I can tune a cw signal and it will decode the signal if it is
>>> strong enough but I can't get the radio to go back to the regular 538
>>> While in the CW mode, you don't have AM or FM capabilities and I
>>> like to
>>> listen to AM BCB/SW. I operate cw 99% of the time but have no need
>>> the decode function.
>>> Holding the "MODE" switch in doesn't give me the option to pick GO
>>> or CW
>>> When turning on the radio the screen indicates :
>>> JUPITER 538 CW
>>> REV 1.03 b4 11.18.2008
>>> Any help or suggestions would be greatly appreciated. I'm reluctant
>>> reload any new firmware until I have a better idea of what is going.
>>> I would like to just go back to the latest regular Jupiter firmware
>>> possible. I've looked through the archives but don't really see
>>> that describes my situation.
>>> If anyone is familiar with the Jupiter and the upgrade to the cw
>>> personality and has an idea of what I am trying to describe I would
>>> appreciate corresponding off the list
>>> My email is firstname.lastname@example.org
>>> TenTec mailing list
>> TenTec mailing list
>TenTec mailing list
TenTec mailing list
TenTec mailing list