I use the 253 with a Centurion 422b at full KW.....no problem.
73
Jerry N9AW
----- Original Message -----
From: "Bry Carling" <bcarling@cfl.rr.com>
To: <tentec@contesting.com>
Sent: Wednesday, December 26, 2012 6:03 AM
Subject: Re: [TenTec] Ten Tec 253 Question
Thanks Dave,
That is very good information. It sounds like if we used the 253 tuner
with something
hefty like the Centurion 422, it might not tolerate the high power. Sounds
like it was
made to use with the solid state amps that put out a little less spark and
grit!
73 de AF4K, Bry
On 25 Dec 2012 at 20:01, Dave wrote:
Brian,
If my memory serves me correctly, the TT 253 was only rated at 1kw
pep and of course that is really dependent upon the load components
that u are trying to match to 50 ohms. The specs for the solid state
amp and the auto tuner are probably available on the web.
73,
Dave,K2DP
Sent from my iPad
On Dec 25, 2012, at 11:15 AM, "Bry Carling" <bcarling@cfl.rr.com>
wrote:
> Can anyone tell me if the Ten Tec 253 Auto Antenna Tuner
> designed fo ruse at 2 KW with an Omni V and Hercules Ampo
> will work also with the CENTAUR model 422?
>
> I was thinking about adding this plus a 422 to my OMNI VI Plus
station and wante dto make
> sure that they will all work together.
>
> Many thanks for any insights!
>
> Brian AF4K
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2805 / Virus Database: 2637/5987 - Release Date:
12/25/12
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|