TenTec
[Top] [All Lists]

Re: [TenTec] TT 422 Blowing Fuses

To: tentec@contesting.com
Subject: Re: [TenTec] TT 422 Blowing Fuses
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 03 Feb 2014 19:25:44 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On 2/2/2014 5:28 PM, Robb Urie wrote:
Then this amp is certainly not stock

I said earlier that I know nothing about this amp, but I do have considerable experience with the Titan 425, and some with the Herc II and Herc I. An important thing to realize about Ten Tec in this time frame is that their designs did evolve over time. My three Titans all differ from each other in subtle ways as Ten Tec engineers did things to make them more reliable.

One place I noticed differences is in the way that the two levels of HV are used, changes to the QSK switching, around the power supply, even the voltage for the dial lamps (12V in one version, 28V in others.) Perhaps a similar evolution occurred with the Centurion. There are differences in RF deck -- how the output circuit is tuned, and how the amp works (or does not) on the WARC bands. One of my three amps isn't happy putting out only 200W on 30M, while the other two work 30M just fine.

73, Jim K9YC


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>