I did - that's why I mentioned that there seemed to ba a rash of failures
around the same time with the RF Parts 3-500ZG's. They were currently
advertising to indicate they were "better" than the Taylor branded tube made
in China, but as a number of us discovered, there seemed to be a "production
problem" (I'll call it, to be kind) that we all felt. I don't know how the
later tubes fared because the person I sold the amp to stored it in a closet
with a lot of other ham gear he intended to put on the air some day. I
think he eventually sold it all, so I have lost track of it. Not a big deal
at this point, but the common wisdom at the time was to find EIMAC's, if you
could, as they were a lot more reliable. That could be completely upside
down now, especially since EIMAC's are probably scarce as hens teeth.
73, Duane
Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Rick -
DJ0IP / NJ0IP
Sent: Monday, August 11, 2014 7:07 AM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] Hercules 444 amp
Duane, even if things were in best order, all products from all companies
still have occasional premature failures and somebody is always the proud
owner. Perhaps you just had bad luck, unless you heard of a lot of similar
cases.
73 - Rick, DJ0IP
(Nr. Frankfurt am Main)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Duane
Calvin
Sent: Monday, August 11, 2014 1:33 PM
To: George Fritkin; Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Hercules 444 amp
I don't think we're talking power out, but rather long-term reliability. At
the time I had the two pairs of RF Parts 3-500ZG's they were touting how
they had the factory running to meet their manufacturing criteria. They had
done a lot of work to improve the factory's product to meet their
requirements. Maybe this is all old news now.
73, Duane
Duane Calvin
Sent from my iPhone
> On Aug 11, 2014, at 12:41 AM, George Fritkin via TenTec
<tentec@contesting.com> wrote:
>
> A couple of years ago I decided to replace the Eimacs in my SB220
> after all they were the original tubes. I carefully measured power
> out. We were going to San Diego so on the way I picked up a new pair
> at RF parts. I got home installed the new tubes. Guess what, with
> new tubes.........exactly same power out
>
> Oh, we'll
>
> George, W6GF
>
> Sent from my iPad
>
>> On Aug 10, 2014, at 6:51 PM, "Duane Calvin" <ac5aa1@gmail.com> wrote:
>>
>> Sure, Carter. My Centurion came new with two RF Parts 3-500ZG's.
>> This was fairly early in the life of this tube configuration
>> (graphite anode variety) and manufacturer, and TT had just started
advertising they were using them.
>> After about 2 years of occasional use, generally running between
>> 600-900W (and all settings well within the safe zone), one of the
>> original tubes developed the infamous grid/cathode short. I replaced
>> the original tubes with a new matched-pair of 3-500ZG's from RF
>> Parts, and shortly after that I sold the amp (with a used spare
>> tube). I know lots of guys who have had Heath and other amps with
>> EIMAC 3-500Z's in them for years with very few problems. Yes, mine
>> could have been a late early life failure, but at that time I was
>> reading of others having similar problems with these tubes. That was
>> a few years ago - maybe RF Parts has improved their relationship with the
factory that makes these tubes and all is well today. So, my "data"
>> consists of one in-person experience along with a number of other
>> reported failures around the same time, for whatever that's worth.
>> The implication, to me, is that the tubes at that time were not of
>> the same quality level as EIMAC's.
>>
>> 73, Duane
>>
>>
>> Duane Calvin, AC5AA
>> Austin, Texas
>> www.ac5aa.com
>>
>>
>>
>>
>> -----Original Message-----
>> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of
>> Carter
>> Sent: Sunday, August 10, 2014 8:33 PM
>> To: tentec@contesting.com
>> Subject: Re: [TenTec] Hercules 444 amp
>>
>>> On 8/10/2014 2:08 PM, Duane Calvin wrote:
>>> This was certainly true of the EIMAC tubes, as long as you cared
>>> well for them. I've not had as good a luck with the current
>>> Chinese-sourced tubes (specifically, the 3-500ZG's from RF Parts,
>>> which the Centurion uses.)
>>
>> My Centurion (which I obtained used 20 years ago) finally had one of
>> its tubes [rather spectacularly] go to the great beyond.
>>
>> Unless I get really lucky and find a NOS pair at the e-place, it
>> seems like my only other option is a matched pair from RF Parts.
>>
>> Could you please elaborate a bit on your statement above that says
>> "I've not had as good a luck with the current Chinese-sourced tubes
>> (specifically, the 3-500ZG's from RF Parts)".
>>
>> 73,
>> Carter K8VT
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|