I'm not sure sandpaper, particularly as coarse as 320 grit, is a good idea. A
proper contact cleaner such as DeOxit would probably be a better solution.
TNX/73, Al
On Mon May 9 2016 10:19:41 am MARY DOUGLAS wrote:
> My microphone has quit working several times. The contact pins will corrode
> and no matter how tight those little screws are they will not make contact.
> Unscrew the 2 phillips screw sand take out the microphone assembly. Clean
> the two pins from the mic boom with 320 grit sandpaper. Clean the ends of
> the 2 screws while you are at it. That should do it.
>
> We Winter near South Padre Island in Texas and the atmosphere there is very
> salty.
>
> Good luck & 73
>
> KC0QQ
>
> On Sun, May 8, 2016 at 2:25 PM, MARY DOUGLAS <mmdtodwd@gmail.com> wrote:
> > What is not working? I have had to fix mine 3 times with no help from the
> > factory.
> >
> > On Sun, May 8, 2016 at 3:24 AM, Wolf Wita via TenTec <
> >
> > tentec@contesting.com> wrote:
> >> HiI have got a Ten-Tec 777 Dx Pro Headset,but the Mikrofone is not
> >> working .Can anyone tell me where to buy one?I think its made by
> >> Heil.Many ThanksWolf G4ssx
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|