I'll take your bet and raise ya ten. A quick check shows several Radio Shack
stores in the corpus area that carry deoxit. A few relatively close to Port
Aransas. I only set the search area criteria to 50 miles. You should be able to
find pretty easy. Koss is pretty good too.
> Date: Mon, 9 May 2016 12:18:48 -0500
> From: mmdtodwd@gmail.com
> To: clayton_n4ev@yahoo.com; tentec@contesting.com
> Subject: Re: [TenTec] Mike Element
>
> That's all well and good, but I bet you won't find any Deoxit within 100
> miles of the beach in Port Aransas, Texas, where we are camped. You do what
> you need to do stay on the air. You can say never as many times as you like
> without SHOUTING. A point I would like to make, both Ten Tec and Bob Heil
> need to look at Koss headphones. I have owned Koss cans since 1962 and have
> NEVER had a cable failure. They also guarantee them for life.
>
> On Monday, May 9, 2016, Clayton Brantley via TenTec <tentec@contesting.com>
> wrote:
>
> > The best contact cleaner is brown paper from an old paper bag. NEVER
> > NEVER NEVER use sand paper on
> > any electrical contacts. You might add a little Deoxit to the paper and
> > apply slight pressure to the contact
> > as you wipe the paper back and forth. Most of the contacts are sliver
> > plated and once it is gone, you might
> > as well throw it out. Did I say NEVER use sand paper? Well DON"T!!!!!
> >
> > Clayton N4EV
> > --------------------------------------------
> > On Mon, 5/9/16, MARY DOUGLAS <mmdtodwd@gmail.com <javascript:;>> wrote:
> >
> > Subject: Re: [TenTec] Mike Element
> > To: "Wolf Wita" <g4ssx@yahoo.co.uk <javascript:;>>, "Discussion of
> > Ten-Tec Equipment" <tentec@contesting.com <javascript:;>>
> > Date: Monday, May 9, 2016, 11:19 AM
> >
> > My microphone has quit working
> > several times. The contact pins will corrode
> > and no matter how tight those little screws are they will
> > not make contact.
> > Unscrew the 2 phillips screw sand take out the microphone
> > assembly. Clean
> > the two pins from the mic boom with 320 grit sandpaper.
> > Clean the ends of
> > the 2 screws while you are at it. That should do it.
> >
> > We Winter near South Padre Island in Texas and the
> > atmosphere there is very
> > salty.
> >
> > Good luck & 73
> >
> > KC0QQ
> >
> > On Sun, May 8, 2016 at 2:25 PM, MARY DOUGLAS <mmdtodwd@gmail.com
> > <javascript:;>>
> > wrote:
> >
> > > What is not working? I have had to fix mine 3 times
> > with no help from the
> > > factory.
> > >
> > > On Sun, May 8, 2016 at 3:24 AM, Wolf Wita via TenTec
> > <
> > > tentec@contesting.com <javascript:;>>
> > wrote:
> > >
> > >> HiI have got a Ten-Tec 777 Dx Pro Headset,but the
> > Mikrofone is not
> > >> working .Can anyone tell me where to buy one?I
> > think its made by Heil.Many
> > >> ThanksWolf G4ssx
> > >> _______________________________________________
> > >> TenTec mailing list
> > >> TenTec@contesting.com <javascript:;>
> > >> http://lists.contesting.com/mailman/listinfo/tentec
> > >>
> > >
> > >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com <javascript:;>
> > http://lists.contesting.com/mailman/listinfo/tentec
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com <javascript:;>
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|