Towertalk
[Top] [All Lists]

Rohn bolts

To: <towertalk@contesting.com>
Subject: Rohn bolts
From: n4si@techinter.com (n4si)
Date: Tue, 17 Dec 1996 21:41:08 +0000
>       A question:  Does anyone have a theory as to why Rohn uses fine
> thread on tower bolts?

Just an idea, with no claim to actual knowledge. My previous comments 
about being able to back off SAE threads even through rust because of 
the shallower thread angle, suggests an increased holding ability 
without the necessity of lockwashers. Also, the fine thread would 
allow easier installation through the zinc coating. Flame away.

> 
>       A comment:  When 1/4 or 5/16 inch SS galls, I've never had a
> problem breaking the bolt.  
> 

Do you mean you've never had a problem with a bolt breaking or 
getting a bolt to break?

Isn't the English language great?

73, Rod N4SI
    The DXer formerly known as N9AKE
         (c) 5 November, 1996

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>