[TowerTalk] thimble gap too narrow

Towertalk

[TowerTalk] thimble gap too narrow

To:	<towertalk@contesting.com>
Subject:	[TowerTalk] thimble gap too narrow
From:	KJ6Y@aol.com (KJ6Y@aol.com)
Date:	Fri, 6 Jun 1997 18:04:02 -0400 (EDT)

I use a pair of pliers to spread them apart, put them on the turnbuckle, then
squeeze them back together.
Skip, KJ6Y
Communications Service Co.
http://members.aol.com/kj6y/skip.html

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] thimble gap too narrow, Pete Soper [TowerTalk] thimble gap too narrow, Donnie Murray (KE4RNA) [TowerTalk] thimble gap too narrow, T. A. Russell [TowerTalk] thimble gap too narrow, Bill Simpson [TowerTalk] thimble gap too narrow, KJ6Y@aol.com <= [TowerTalk] thimble gap too narrow, Pete Soper [TowerTalk] thimble gap too narrow, Frank Donovan [TowerTalk] thimble gap too narrow, Steve Zettel [TowerTalk] thimble gap too narrow, Roderick M. Fitz-Randolph Re[2]: [TowerTalk] thimble gap too narrow, pramey@smtplink.ram.com Re[2]: [TowerTalk] thimble gap too narrow, Pete Soper [TowerTalk] thimble gap too narrow, Stan Griffiths

Previous by Date:	[TowerTalk] Triex THD-588, KJ6Y@aol.com
Next by Date:	[TowerTalk] Switching 450 ohm twinlead?, Rick Mainhart
Previous by Thread:	[TowerTalk] thimble gap too narrow, Bill Simpson
Next by Thread:	[TowerTalk] thimble gap too narrow, Pete Soper
Indexes:	[Date] [Thread] [Top] [All Lists]