the local power co. has all sorts of anchors of various sizes,cheap and
friendly.
n8gan ken/ken's antenna services , in Mi.
----------
> From: Bill Aycock <baycock@hiwaay.net>
> To: Litwins <litwins@badsector.com>; towertalk@contesting.com
> Subject: Re: [TowerTalk] screw anchors
To: <towertalk@contesting.com>
> Date: Friday, April 10, 1998 4:06 PM
>
> Steve- I have been looking for some smaller anchors, for a small tubular
> tower, and had similar lack of results. The best bet is a mobile home
> installer or parts supplier. I found some, larger than I needed, with
two,
> 4" blades, about a foot apart, on a shaft that was about 3-1/2 feet
long.
> These were the smallest I could find, and were the smallest allowed by
> Alabama state law, for trailers.
>
> Worth a try.
>
> Bill- W4BSG
>
>
> At 05:03 PM 4/10/98 GMT, you wrote:
> >Cuppla questions;
> >I live in NW FL. Sand, clay etc for a place to put guy anchors. I am
> >re-installing my tower used in WV for yrs here in FL. Does anybody have
any
> >experience using screw anchors in this area? Or one like it? I have
the
> >anchors from the WV site. They are 4', abt a 1" shaft dia and the screw
> plate is
> >just 4.5 to 5 inches dia. Look kinda puny to me now but worked thru all
> >kinds of bad wx in WV. The tower is 55' home-made (welded) tublar
steel, 3
> >legs, cross bracing etc in 10' and one 5' section at the base. It will
only
> >support a TH5DXX, Ham IV, thrust brng, plates etc. Tower was guyed at
35'
> and
> >top, 35' out from base. Seeemed to work ok in WV dirt and rocks. Any
ideas
> >on wether it will hld ok here in NW FL?? Or should I spring for larger
> >anchors? Which brings up question #2...I have tried locally to purchase
new
> >screw anchors; no luck. Any suggestions for a resource? Mny tnx in
advance,
> >73, dx, steve k8wk
> >
> >
> >--
> >FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> >Submissions: towertalk@contesting.com
> >Administrative requests: towertalk-REQUEST@contesting.com
> >Problems: owner-towertalk@contesting.com
> >Search: http://www.contesting.com/km9p/search
> >
> >
>
> Bill Aycock W4BSG
> Jackson County, AL
> EM64vr
> W4BSG is "vanity" this time, but was
> earned by exam in 1954, the first time.
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|