Why no torque arms? Also what do you mean by, "two top guys / anchor"? Do
you mean double the top guys?
Lee
Steven H. Sawyers n0yvy wrote:
> The limiting part of the Rohn standard installation in heights under a 100'
> is the
> guy strength. Keep the guy spacing around 25-30 feet, use the guy brackets
> - no torque arms - and use two top guys per anchor on top to take out the
> torsional loads. If you want 100 feet of Rohn 25 to hold up a TH 11 then put
> 1/4 inch guys on it and double the top guy. In ice country use 5/16.
>
> de n0yvy steve
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|