Towertalk
[Top] [All Lists]

[TowerTalk] Force12

To: <towertalk@contesting.com>
Subject: [TowerTalk] Force12
From: Roger Borowski" <K9RB@arrl.net (Roger Borowski)
Date: Wed, 3 Oct 2001 07:50:44 -0400
If your feed lines go down the antenna support structure / tower to ground 
level, as they must to provide for adequate
lightning protection, a move, assuming from the basement or first floor to the 
second floor should require additional
feedline length!  -=Rog-K9RB=-

----- Original Message -----
From: Ed Wolf <n3ue@arrl.net>
To: TowerTalk <towertalk@contesting.com>
Sent: Tuesday, October 02, 2001 11:20 PM
Subject: [TowerTalk] Force12


>
> Force 12 recommends using a minimum of 100 feet
> of coax for their C4SXL feed lines. I just moved my
> shack to the second floor and now have over 30 feet
> each of both of the feed lines. Has anybody used shorter
> coax with their antenna? I was told by F12 that if I
> use shorter coax, the BW would suffer.
> tnx
>
> Ed Wolf - ars:N3UE - NA40+TR.PA
> http://members.home.net/wolfie132/
> http://www.breezeshooters.net
> http://www.breezeshooters.com
>
>
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>
>



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>