Towertalk
[Top] [All Lists]

Fw: [Towertalk] Re: Coax Connector Losses - Does anyone know?

To: <towertalk@contesting.com>
Subject: Fw: [Towertalk] Re: Coax Connector Losses - Does anyone know?
From: NN7K@reno.rmci.net (NN7K@reno.rmci.net)
Date: Thu, 11 Jul 2002 15:01:47 -0700
----- Original Message -----
From: <NN7K@reno.rmci.net>
To: "Bill Coleman" <aa4lr@arrl.net>
Sent: Thursday, July 11, 2002 3:00 PM
Subject: Re: [Towertalk] Re: Coax Connector Losses - Does anyone know?


> quite simple, really-  1) tin the braid of the coax.  2)  use a tubeing
> cutter, to cut braid, and center plastic in coax down to inside wire (s)
> to fit in connector. about 1/2 inch of the outer shield exposed.center
> conductor can be any lenght-you will cut it off after following below
> 3) place pl259 on the coax, and 4) "SWEAT" solder  thru the 4 holes
(solder
> sweats, as in flows toward the heat)  apply heat to left (or right side of
> connector), and without moving coax/connector, start applying solder to
the
> top hole. as it starts to flow, move to other hole on opposite side of the
> connector.   works with rg 8,11, 213, ect for me!  good luck, 73 jim nn7k
>
>
> ----- Original Message -----
> From: "Bill Coleman" <aa4lr@arrl.net>
> To: <n2tk@arrl.net>; <ka4inm@tampabay.rr.com>; "'Tower Talk'"
> <towertalk@contesting.com>
> Sent: Thursday, July 11, 2002 2:32 PM
> Subject: RE: [Towertalk] Re: Coax Connector Losses - Does anyone know?
>
>
> > On 5/31/02 9:25 AM, N2TK at tony.kaz@verizon.net wrote:
> >
> > >You don't pull the shied through the 4 holes. You first tin the shield
> then
> > >install the PL-259. Then you solder the tinned shield through the 4
holes
> so
> > >that you have a good electrical connection.
> >
> > You know, the problem I often have with this technique is that I cannot
> > put the connector barrel on to the RG-213 if there's too much tinning.
> > The coax tends to twist and distort, and I can't really grab it with
> > pliers without damaging it.
> >
> > So, what's the best way to put a PL-259 connector on? How do you hold to
> > coax still while rotating the connector barrel?
> >
> >
> >
> > Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr@arrl.net
> > Quote: "Not within a thousand years will man ever fly!"
> >             -- Wilbur Wright, 1901
> >
> > _______________________________________________
> > Self Supporting Towers, Wireless Weather Stations, see web site:
> http://www.mscomputer.com
> > Call 888-333-9041 to place your order, mention you saw this ad and take
an
> additional 5 percent off
> > any weather station price.
> > _______________________________________________
> > Towertalk mailing list
> > Towertalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>


<Prev in Thread] Current Thread [Next in Thread>